LW-ALU-REC
Applications:
– housing for flexible or hard LED strips that are 8-10mm wide (0.39″)
– eliminates obstacles related to LED light strip mounting
– extrusion acts as the connector between the light source and the application area and provides a stylish and finished look
– maximizes the applications and uses available for LED light strips
– lighting or illumination of certain areas (stream of light may vary depending on the power of applied LEDs)
– indoor: interior design, furniture (kitchen cabinets, closets), stairs, stair railings, exhibitors, advertisement, hotels, work stations, (hardly accessible – shaded spots)
– extrusion can be made waterproof ( IP 67 ) and be used as an outdoor lighting for elevations or architectural elements of gardens.
Material: Anodised aluminium
Cover: Frosted
Standard Length: 2m
Mounting: Mounting glue, double sided mounting tape, mounting brackets
Ending Element: Plastic end caps (accessories)
Certificate: CE, UR
Advantages: Small dimensions, easily release heat, simple assembly, lightweight, environment-friendly.
LW-ALU-REC-F
Applications:
– recessed housing for flexible or hard LED strips that are 8-10mm wide (0.39″)
– eliminates obstacles related to LED light strip mounting
– extrusion acts as the connector between the light source and the application area and provides a stylish and finished look
– maximises the applications and uses available for LED light strips
– lighting or illumination of certain areas (stream of light may vary depending on the power of applied LEDs)
– indoor: grooves (profile can fit slim design and thin furniture pieces, wall surfaces, drywalls)
– extrusion can be made waterproof ( IP 67 ) and be used as an outdoor lighting for elevations or architectural elements of gardens. Product Description:
Material: Double anodised aluminium
Cover: Frosted, clear
Standard Length: 2m
Mounting: Mounting glue, double sided mounting tape
Ending Element: Plastic end caps (accessories)
Certificate: CE, UR
Advantages:
Small dimensions ( just 6mm high), profile can fit slim design and thin furniture pieces, special collar of the profile enables unaesthetic grooves to be covered, * ( groove – a specially prepared narrow space in the wall surface, drywall, stone block etc.) easy assembly, lightweight, easily release heat, environment friendly.
LW-ALU-MICRO
Applications:
– shallow housing for flexible or hard LED strips that are 8-10 wide (0.39”)
– lighting or illumination of certain areas (stream of light may vary depending on the power of applied LEDs)
– indoor: interior design, furniture (kitchen cabinets, closets, thin furniture elements), stairs, exhibitors, advertisement, hotels, workstations, shelving
– illumination hardly accessible areas
– shaded spots
– outdoor (profile is not waterproof, not to be applied if directly exposed to weather conditions)
Material: Anodised aluminium
Cover: Frosted
Standard Length: 2m
Mounting: Mounting glue, double sided mounting tape, mounting brackets
Ending Element: Plastic end caps (accessories)
Certificate: CE, UR
Advantages:
Small dimensions ( just 6mm high), profile can fit slim design and thin furniture pieces, lightweight, easily release heat, environmentally friendly.
LW-ALU-MICRO-F
Applications:
– recessed shallow housing for flexible or hard LED strips that are 8-10mm wide (0.39”)
- lighting or illumination of certain areas (stream of light may vary depending on the power of applied LEDs)
- indoor: grooves (profile can fit slim design and thin furniture pieces, wall surfaces, drywalls)
– outdoor (IP67 waterproof level can be achieved)
Product Description:
Material: Anodized aluminum
Cover: Frosted or Clear
Standard Length: 2m
Mounting: Double sided mounting tape or mounting glue
Ending Element: Plastic end caps (accessories)
Certificate: CE, UR
Advantages:
Small dimensions (just 6mm high), profile can fit slim design and thin furniture pieces, special collar of the profile enables unaesthetic grooves to be covered, * ( groove – a specially prepared narrow space in the wall surface, drywall, stone block etc.) easy assembly, lightweight, easily release heat, environmentally friendly.
LW-ALU-MINI (NEW)
Applications:
– recessed or surface shallow housing for flexible or hard LED strips that are 8-12mm wide
– lighting or illumination of certain areas (stream of light may vary depending on the power of applied LEDs)
– indoor: grooves (profile can fit slim design and thin furniture pieces, wall surfaces, drywalls)
– outdoor (IP67 waterproof level can be achieved)
Product Description:
Material: Anodized aluminum
Cover: Frosted or Clear
Standard Length: 2m
Mounting: Double sided mounting tape or mounting glue
Ending Element: Plastic end caps (accessories)
Certificate: CE, UR
Advantages:
Small dimensions (just 9.3mm high), profile can fit slim design and thin furniture pieces, special collar of the profile enables unaesthetic grooves to be covered, * ( groove – a specially prepared narrow space in the wall surface, drywall, stone block etc.) easy assembly, lightweight, easily release heat, environmentally friendly.
LW-ALU-45
Applications:
– housing for flexible or hard LED strips that are 8-10mm wide (0.39”)
– lighting or illumination of certain areas (stream of light may vary depending on the power of applied LEDs)
– all types of grooves, inputs or surface edges
– indoor and outdoor (profile is not waterproof, not to be applied if directly exposed to weather conditions)
Material: Anodised aluminium
Cover: Frosted
Standard Length: 2m
Mounting: Mounting brackets, double-sided mounting tape
Ending Element: End caps (accessories)
Certificate: UR, CE
Advantages:
Small dimensions, IP65 waterproof level can be reached, 45 degree beam angel – directed array of light does not irritate the eyes of the potential user, lightweight, modern design, environment friendly. Profile designed to be inserted into all types of grooves, inputs or to be mounted to different surface edges. The light is directed at a 45-degree angle so that it does not hurt the potential user’s eyes. Can be applied to furniture, exhibitors etc.
LW-ALU-BOX
Description:
Architectural extrusions for LED tape – dedicated to be mounted into ceilings and drywall. Their height was designed the way that they can produce a single line of light with LEDs spaced 15mm apart and a frosted cover HS 22. The extrusion can accomodate two of the 10mm wide LED strips. Extrusion can be mounted to a surface with the use of mounting springs.
Length: 2m (standard)
Surface finish: Anodised
LW-ALU-BOX-F
Description:
Architectural extrusions for LED tape – dedicated to be mounted into ceilings and drywall. Their height was designed the way that they can produce a single line of light with LEDs spaced 15mm apart and a frosted cover HS 22. The extrusion can accomodate two of the 10mm wide LED strips. Extrusion can be mounted to a surface with the use of mounting springs.
Length: 2m (standard)
Surface finish: Anodised
LW-ALU-BOX2
Description:
Architectural extrusions for LED tape – dedicated to be mounted into ceilings and drywall. Their height was designed the way that they can produce a single line of light with LEDs spaced 15mm apart and a frosted cover HS 22. The extrusion can accomodate two of the 10mm wide LED strips. Extrusion can be mounted to a surface with the use of mounting springs.
Length: 2m (standard)
Surface finish: Anodised
LW-ALU-CURVE
Applications:
– housing for flexible or hard LED strips that are 8-12.8mm wide (0.50″)
– eliminates obstacles related to LED light strip mounting
– extrusion acts as the connector between the light source and the application area and provides a stylish and finished look
– maximizes the applications and uses available for LED light strips
– lighting or illumination of certain areas (stream of light may vary depending on the power of applied LEDs)
– used as interior lighting, surface mount extrusion: shelving, ceilings, cabinets etc.
Material: Double anodized aluminum
Cover: Frosted or Clear
Standard Length: 2m
Mounting: Mounting glue, double sided mounting tape
Ending Element: Plastic end caps (accessories)
Certificate: CE
LW-ALU-FLOOR
Applications:
– outdoor housing for flexible or hard LED strips that are 8-11.5mm wide (0.45”)
– lighting or illumination of certain areas (stream of light may vary depending on the power of applied LEDs)
– outdoor applications: different types of pavements, sidewalk surfaces, communication routes, bike lanes, driveways, parking lots
– profile construction makes it durable and sturdy, resistant to standard loads (up to 20 kN)- designed to be made waterproof level and achieve IP 67 rating
Material: Non-anodized aluminum
Cover: Frosted
Standard Length: 2m
Mounting: Frost resistant elastic ceramic glue or cement
Ending Element: Plastic end caps ( accessories ); silicone glue: frost resistant (-40 ° C / + 180 ° C) (-40 ° F / 356° F), waterproof, does not conduct power.
Certificate: CE
Advantages:
The frosted cover and a densely LED-spaced strip inside the extrusion will provide an effect of an even line of light. Due to its high integrity and high load bearing capacity, this extrusion is ideal for high-traffic areas such as sidewalks and bike paths. It is environmentally friendly.
LW-ALU-OPTIC
Applications:
– housing for flexible or hard LED strips that are 8-10mm wide (0.4″)
– eliminates obstacles related to LED light strip mounting
– extrusion acts as the connector between the light source and the application area and provides a stylish and finished look
– maximizes the applications and uses available for LED light strips
– lighting or illumination of certain areas (stream of light may vary depending on the power of applied LEDs)
– provides 4 different light angles: 10, 30, 60, 90 degree
– used as interior lighting, especially to light cabinets, stairs, glass-cases, or as a decoration light for a niche in drywall ceilings
– extrusion can be made waterproof ( IP 67 ) and be used as an outdoor lighting for elevations or architectural elements of gardens.
Material: Double anodised aluminium
Cover: Frosted
Standard Length: 2m
Mounting: Mounting glue, double sided mounting tape, mounting bracket
Ending Element: Plastic end caps (accessories)
Certificate: CE
Advantages:
Regular extrusion includes aluminium insert. The insert permits to adjust angles of LED light. 4 different light angles can be received by assembling the extrusion with focusing cover “S” and putting insert into the extrusion in the proper notch. If these two conditions are fulfilled it is possible to get the following angles of light: 10 degree (without insert) and 30, 60, 90. Environment friendly; modern design.
