Lightwave stocks a range of LED Controllers, including wired and Wi-Fi, wall-mounted and handheld options for DMX colour-changing LED lighting.
LED Controllers
Wireless Handheld Controllers
Our M1 LED controller is a radio frequency wireless dimmer, renowned for its quality, reliability and ease of use. The unit comes complete in a kit with one receiver and a wall cradle for the handheld remote.
Multiple receivers can be connected to one remote control, allowing lights on different circuits to be dimmed simultaneously. The remote also features two scene-saving buttons. This allows you to select a preferred light level, and to set it as a preset by holding one of the scene save buttons for two seconds.
This RF controller has a range of approximately 30m and does not require a ‘line of sight’ to operate. This means that the receiver unit can be hidden away in a cupboard or above a ceiling for instance.
The M1 controller is capable of dimming from 100W at 5V, all the way up to 480W at 24V DC. If you need to provide power beyond these levels, then you can easily extend this with the use of a data repeater such as our RP306 unit. This means that a practically unlimited amount of LED lighting can be added to the circuit.
This product is CE and ROHS-approved to comply with UK safety regulations.
Our M6 RGB LED controller is a 3-channel radio frequency wireless unit, renowned for its quality, reliability, and ease of use. The unit comes complete in a kit with one receiver and a wall cradle for the handheld remote.
Multiple receivers can be connected to one remote control, allowing lights on different circuits to be controlled simultaneously. The remote features a number of lighting effects which include: dimming, fading, jumping, flashing, and independent speed control of each effect. There is also a simple palette of preset static colours to choose from for ease of use. As this controller is 3-channel, it can be used with RGB LED lighting and features a separate ‘white’ button.
This RF controller has a range of approximately 30m and does not require a ‘line of sight’ to operate. This means that the receiver unit can be hidden away in a cupboard or above a ceiling for instance.
The M6 controller is capable of dimming from 100W at 5V, all the way up to 480W at 24V DC. If you need to provide power beyond these levels, then you can easily extend this with the use of a data repeater such as our RP306 unit. This means that a practically unlimited amount of LED lighting can be added to the circuit.
This product is CE and ROHS-approved to comply with UK safety regulations.
Our T4 RGBW LED controller is a 4-channel, multi-zone 2.4GHZ RF wireless unit, renowned for its quality, reliability and ease of use. The unit comes complete with a wall cradle for the handheld remote.
Up to eight receivers can be connected to one remote control, allowing lights on different circuits to be individually controlled as separate zones. The remote features a number of lighting effects which include: dimming, fading, etc, and independent speed control of each effect. There is also a simple number grid of preset static zones to match to the receivers for ease of use. As this controller is 4-channel, it can be used with RGBW LED lighting and features a separate ‘white’ button for this.
This RF controller has a range of approximately 30m and does not require a ‘line of sight’ to operate. This means that the receiver’s unit can be hidden away in a cupboard or above a ceiling for instance.
The T4 controller is capable of dimming from 100W at 5V, all the way up to 480W at 24V DC. If you need to provide power beyond these levels, then you can easily extend this with the use of a data repeater such as our RP306 unit. This means that a practically unlimited amount of LED lighting can be added to the circuit.
This product is CE and ROHS-approved to comply with UK safety regulations.
Note: T4-CV receiver units are sold separately.
Wall Mounted Controllers (Wired & Wireless)
- DX1 Wireless Wall Dimmer
- DX5 Wireless Multi-Zone Wall Dimmer
- D8 Wired Multi-Zone RGBW Wall Controller
- DX8 Wireless Multi-Zone RGBW Wall Controller
Our DX1 wireless dimmer is a sleek and professional wall-mounted controller for single-colour LED lighting. It features a high-grade tempered touch-sensitive glass front panel, a scene save function for recalling previously set dimming levels, and a 30-second delay off button.
It is 230V mains powered at the wall, and suitable for 12/24V DC lighting circuits via a wireless receiver. It fits perfectly into standard UK back boxes and does not require any custom accessories.
This wall-mounted controller is capable of dimming LED lighting remotely via 2.4Hz wireless RF within a 30-metre range. Alternatively, the unit has a DMX 512 output on the rear for controlling DMX lighting circuits directly via a wired connection.
The DX1 features a quiet musical chord and LED indicator light on each touch, giving you visual and auditory feedback. It also incorporates the latest T-PWM dimming technology plus a 4096 point grey scale which gives a perfectly smooth dimming performance. This high-accuracy system gives a much more precise and pleasant touch control than most alternative products available.
Note: wireless receivers are sold separately.
Our DX5 wireless multi-zone dimmer is a sleek and professional wall-mounted controller for white LED lighting. It features a high-grade tempered touch-sensitive glass front panel, 3 memory functions to store scenes, and a 4-zone switch selection.
It is 230V mains powered at the wall, and suitable for 12/24V DC lighting circuits via a wireless receiver. It fits perfectly into standard UK back boxes and does not require any custom accessories.
This wall-mounted controller is capable of dimming LED lighting remotely in 4 separate zones via 2.4Hz wireless RF within a 30-metre range. Alternatively, the unit has a DMX 512 output on the rear for controlling DMX lighting circuits directly via a wired connection.
The DX5 features a quiet musical chord and LED indicator light on each touch, giving you visual and auditory feedback. It also incorporates the latest T-PWM dimming technology plus a 4096 point grey scale which gives a perfectly smooth dimming performance. This high-accuracy system gives a much more precise and pleasant touch control than most alternative products available.
Note: wireless receivers are sold separately.
The D8 touch controller provides you with 4 zones and mode functions with 11 different modes, brightness control by zone, speed adjustment and separate brightness control per colour.
Our D8 wired multi-zone RGBW controller is a sleek and professional wall-mounted controller for 4-channel RGBW colour LED lighting. It features a high-grade tempered touch-sensitive glass front panel, an effect mode selector, brightness/speed control, a touch colour wheel, and a 4-zone switch selection.
It is 12-24V DC powered at the wall, and suitable for any DMX lighting circuits via wired DMX decoders. It fits perfectly into standard UK back boxes and does not require any custom accessories.
This wall-mounted controller is capable of controlling RGBW LED lighting in 4 separate zones via a DMX 512 output on the rear of the unit.
The D8 features a quiet musical chord and LED indicator light on each touch, giving you visual and auditory feedback. It also incorporates the latest T-PWM dimming technology which gives a perfectly smooth dimming performance. This high-accuracy system gives a much more precise and pleasant touch control than most alternative products available.
Note: wireless receivers are sold separately.
The DX8 touch controller provides you with 4 zones and mode functions with 11 different modes, brightness control by zone, speed adjustment and separate brightness control per colour.
Our DX8 wireless multi-zone RGBW controller is a sleek and professional wall-mounted controller for 4-channel RGBW colour LED lighting. It features a high-grade tempered touch-sensitive glass front panel, an effect mode selector, brightness/speed control, a touch colour wheel, and a 4-zone switch selection.
It is 230V mains powered at the wall and suitable for 12/24V DC lighting circuits via a wireless receiver. It fits perfectly into standard UK back boxes and does not require any custom accessories.
This wall-mounted controller is capable of controlling RGBW LED lighting remotely in 4 separate zones via 2.4Hz wireless RF within a 30-metre range. Alternatively, the unit has a DMX 512 output on the rear for controlling DMX lighting circuits directly via a wired connection.
The DX8 features a quiet musical chord and LED indicator light on each touch, giving you visual and auditory feedback. It also incorporates the latest T-PWM dimming technology which gives a perfectly smooth dimming performance. This high-accuracy system gives a much more precise and pleasant touch control than most alternative products available.
Note: wireless receivers are sold separately.
Professional DMX Controller
The ColourStyle512 DMX controller has been designed with the non-technical user in mind. With the use of RGB/W DMX fixtures in residential, commercial and architectural applications on the increase, the requirement for a simple-to-program, simple-to-operate controller has become essential. This is something that has not previously been addressed, as most professional DMX controllers available are aimed at the entertainment and stage production lighting industry.
- Stand-alone operation
- Infrared handset available
- TCP/IP ethernet connectivity
- Twin full DMX512 universes
- Intuitive set-up and operation
- Ultra smooth digital dimming
- Includes a library of DMX luminaires
- Multi-lingual on-screen information
- Sound-to-light for stunning effects
- A range of different MK plate finishes available
- Master brightness and speed control
- Built-in real-time astronomical clock
- Fits into a standard 47mm UK electrical back box
- Backlit LCD screen for information and OEM logos
Wireless & ArtNet Controllers
Our LED WiFi 106 controller is a versatile wireless home/office lighting control system. Through either a direct WiFi connection to the controller or via your existing wireless router, you can control up to 12 individual zones of lighting via the Apple IOS or Android mobile device app.
The WiFi control system includes built-in functions for dimming, colour temperature adjustment, RGB and RGBW control.
If you connect your WiFi controller to your existing wireless router, then you can expand the scope of your installation by using multiple controllers, each with up to 12 individual zones of control.
The mobile apps are free to download from the Apple App Store and the Google Play Store. This WiFi controller also comes complete with a 2.4G RF M12 handheld remote as an additional method of quick and easy on/off control.
Note: R4-5A receiver units are sold separately.
Our ArtNet to DMX converter allows you to control any DMX lighting over Ethernet. You simply plug it into your wireless router to assign it an IP address on your network, then connect up to your DMX-enabled luminaires or DMX decoders via the XLR ports. Your lighting can then be controlled over the network, either wired or wirelessly, via any ArtNet-compatible software or mobile application on MacOS, Windows, Linux, Apple iOS, or Android.
What is ArtNet?
ArtNet is an award-winning data distribution protocol that allows DMX512 and RDM lighting data to be transported over an Ethernet network. It uses a simple UDP-based packet structure designed to provide efficient and low-overhead data flow.
Using the ArtNet protocol you can transport up to 32,768 DMX universes over a single network using standard Ethernet technology equipment. DMX merging allows the use of two controllers on the same system which makes it perfect for small or for large-scale LED installations.
- DMX Universes: 2
- DMX Channels: 2 x 512
- Work Mode: Artnet
- Number of Scenes: 255
- Power Voltage: DC5-24V 300mA
- Power Connector: Round 2.1mm
- Dimensions: 70 x 50 x 40mm
- Net Weight: 0.15kg
- Temperature: -20℃ -50℃
- Input Port: Gigabit Ethernet
- Output Port: 2 x 3-Pin XLR
DMX Decoders & Data Repeaters
- RP306 RGB Data Repeater
- PX403 4-Channel DMX Decoder (RJ45)
- DE8015 4-Channel DMX Decoder (Screw Terminal)
Our RP306 RGB Data Repeater is in effect a signal amplifier for LED lighting. It is used to extend the power capabilities of your existing LED controller so that you can add more RGB LED lighting than it was originally designed to cope with.
It takes four cores (RGBV+) plus either a 12 or 24V DC power supply on the input side, then duplicates those channel voltage levels on the output side where you are connecting your second lot of RGB lighting. This means the additional lights will perform the same colour changes as the RGB lights that are connected to the main controller. By adding the RP306 RGB Data Repeater and another power supply to your circuit, you can theoretically extend your system to control an indefinite amount of RGB lighting.
This unit is designed for use with 12-24V DC systems only, allowing 5A per channel with a maximum power of 180W at 12V DC and 360W at 24V DC. The power supply and RGB signal wires are connected via screw-down style connections.
Our PX403 4-channel DMX decoder allows you to connect four channels of LED lighting to a DMX512 or DMX1990 control system. You can use this unit to connect an RGB LED light plus one single colour LED light, or four single colour LED lights, to one unit. It is ideal for linking LED modules, LED flexible tape, etc. to a DMX512 controller.
The PX403 is designed for use with 12 to 24V DC systems only. It is capable of up to 3A per channel with a maximum power of 144W at 12V DC or 288W at 24V DC.
Each unit has dip switches on the side used to manually change the DMX address of each decoder, and each unit uses 4 DMX addresses. LED lights and power input are connected using screw-down style connectors.
Each PX403 unit comes complete with a 6-inch Cat5 RJ45 patch cable.
CE and RoHS approved.
Note: PX704 Constant Current version is also available for 350mA and 700mA.
Our DE8015 4-channel DMX 512 decoder allows you to connect four channels of LED lighting to a DMX512 or DMX1990 control system. You can use this unit to connect an RGB LED light plus one single colour LED light, or four single colour LED lights, to one unit. It is ideal for linking LED modules, LED flexible tape, etc., to a DMX512 controller.
The DE8015 is designed for use with 12 to 24V DC systems only. It is capable of up to 4A per channel with a maximum power of 190W at 12V DC or 380W at 24V DC.
Each unit has dip switches on the side used to manually change the DMX address of each decoder, and each unit uses 4 DMX addresses. LED lights and power input are connected using screw-down style connectors.
CE and RoHS approved.
Check out our Partners for many more products
We can also supply thousands of other residential, commercial, and industrial lighting products our manufacturing partners offer.
Next Day Delivery
We aim to get every order completed and delivered to you as quickly as possible. We achieve this by keeping large stocks of our products to make sure that most if not all orders, can be fulfilled immediately. You can also rest assured that as soon as your goods are ready, they are immediately dispatched via UK courier on a next-day delivery.